World's Oldest Beehive Discovered in Scotland...

World's Oldest Beehive Discovered in Scottish Chapel

                              Image from scotsman.com

We have read a lot about the demise of the bee colonies but recently the world's oldest beehive has been found. Located in the medieval Scottish Rosslyn Chapel, which dates back to 1446, two ancient hives have been found, skillfully carved in the stone work under the roof's peak. They are thought to be the first man-made stone hives ever found.

The discovery was made whilst some stone conservation work was being carried out which involved dismantling the peaks of the roof. Apparently the hives were still in use until just recently when the chapel was temporarily covered with a canopy and the bees de-camped.

Image from the BBC

The only clues to the hives' existence were flowers intricately carved into the pinnacles -- it is charming that there were holes through which the bees could enter and exit. These were visible from the outside.

The architects in charge of the restoration had no idea that this extra historical treasure existed. One said: "The hives themselves are the ideal size for bees to inhabit. It was a big hollow about the size of a gas cylinder and the hive had obviously been abandoned." The inside of the hive is covered with some coating to protect the stone and stop the wild bees from eating away at it. Honeycombs were also found in the peak.

Since the hive was so high above the ground, it is clear that no one would be able to reach it to get the honey. It is thought that the ancient stone masons who built the chapel simply wanted to provide a safe location for a wild honeybee hive, protected from bad weather.

The hive has been sent to local beekeepers in an attempt to identify the type of insect that made them and it is hoped the bees will return once the renovation works are complete.

Image from the Times: Illustration from 15th century manuscript

The Chapel was featured in the finale of the film of The Da Vinci Code. As a result, tourism has increased from around 25,000 visitors a year to up to 140,000. Hence it has been undergoing restoration work. Apparently there have always been bees in the roof.

According to the Times, reverence for bees dates back to Egyptian times. As depicted in temple pictures, they kept them in cylindrical hives and sealed pots of honey were found in Tutankhamun's tomb. In Scotland, hives are often made of baskets which can be lifted and moved around.

Original Source:  Treehugger.com

Brushy Mountain's "Back to the Basics" July

Back to the Basics: Bearding

Hot and humid weather is hard on the bees during the summer months. Honey Bees can only do so much to help regulate the hive temperature at 90-95 Degrees Fahrenheit. When the colony is at its max population and internal hive temperatures continue to rise, clusters of bees will try to escape the heat of the hive and hang out at the entrance of the hive. This can be misinterpreted as swarming when in fact it is bearding.
Why do bees beard?

When you find bees clustering or hanging at the entrance of the hive, they are bearding. This gives the appearance of the hive having a beard. Some colonies will cover the entrance where others will hang from the bottom board. Colonies will create these beards outside the hive when the inside becomes overcrowded, hive lacks ventilation, or temperatures become too high. Honey Bees typically do this to help maintain the brood nest temperature. Brood requires a certain temperature and will not survive if it becomes too hot or too cold.

How do bees regulate the hive temperature during Summer and how can Beekeepers help?

Have you ever seen a bee at the entrance of the hive beating her wings but not taking flight?She is fanning the hive. Bees will collect water to use for evaporative cooling. Bees will face away from the entrance of the hive and begin fanning. The airflow that is created from the bees beating their wings will evaporate the water droplets throughout the hive. Whenever you find bees fanning at the entrance, know that there are many more inside fanning as well.

Bees can only do so much to reduce the heat in the brood nest. Beekeepers must provide sufficient ventilation for the hive. Here are some tips and tricks for beekeepers to help fight the summer heat:

Nothing can beat a screened bottom board. Airflow is able to move up through bottom board and can significantly help with hive temperature. The screened bottom board is only useful if the screen is left open. Be sure to remove the corrugated sheet used for mite counts.

Ventilate the top as well as the bottom with a ventilated inner cover.Heat rises and the ventilated inner cover offers the space the heat needs to escape. The inner cover props up the hive top allowing airflow to move up and through the hive.

Open up the hive entrance. Larger entrances are better for the summer heat. This provides more fanning space and less congestion for incoming bees.

Allow for more bee space by reducing the number of frames. Consider using 9 frames in your 10 frame hive or 7 in your 8. This will open up space between the frames and better ventilate your hive.

Give your hive some shade. Provide a source of shade especially if the hive is in direct sunlight during the entire day. The sun beating down on the hive makes it difficult for the bees to maintain hive temperature. Open up your upper entrance. This small vent will allow heat to escape the hive and provides an alternate entrance/exit for your bees.

Use light color paint for your hives. Dark colors will absorb heat while lighter colors will reflect the sun’s heat.

Have a reliable source of water near your bee yard. Bees can use up to a quart of water during a hot day to keep the hive cool. Keep the water supply filled and in a shaded area.

Summer heat will keep the bees constantly working to maintain the hive temperature and reduces the number of bees able to forage for nectar and pollen. Help the bees regulate hive temperature and give them a stronger field force to bring in the feed they need. 

ORIGINAL SOURCE:  BRUSHY MOUNTAIN

Swarm Rescue Update...

The swarm  I rescued a few weeks ago, is now kicking some serious butt!  The swarm queen, who I am now calling Catherine II or Catherine the Great is an egg laying machine!  Look at this brood pattern!

 And the rest of the girls are working hard and putting up some honey!  I can't wait to try it!

Brushy Mountain's "Back to Basics" June

Back to the Basics:  Moving Your Hive

Beekeepers will get their hives all setup and painted in a certain location, but sometimes it is not the desired location or they want to move their bees to a different area with a better honey flow.
Either way, sometimes it is necessary to move your hive.

Once bees become established in a certain location, they will go on orientation flights. They start off in small circle, flying back to the hive, and grow the circle until they are set on the location of the hive. Moving a hive will disrupt where the bees are oriented to and beekeepers can lose many foraging bees (Beekeepers hate losing bees!). If you intend to move your hive, we suggest following the rule of 3 (up to 3 feet or over 3 miles). If you move a hive across your 10 foot yard, the bees will return to where the hive was originally located.

If you are intending to move your hive, no matter how far, screen off the entrance the night before with hardware cloth. Your foraging bees will come back to the hive at night and will be leaving when the sun comes up. Screen off the entrance at night so you will be transporting all your bees (inevitably there will be a few stragglers left behind). Don't strain when moving your hive, use a hive carrier or a hive strap to make moving easier.

If you intend to move your hive across your yard or a short distance away from its original location, you must move it off site (over 3 miles away) for a week and then move it back to where you find more suitable. If you intend to move it to a separate location for a better/different honey flow, ensure that you are moving it further than 3 miles from its original location.



Wait... there is another way?
Sometimes it is difficult to continuously move your hive. 

If your desired location happens to be further than 3 feet and less than 3 miles (a.k.a. across the yard), you can use a different method. To trigger the bee’s orientation flight, the environment outside of the hive must be significantly different. Obstruct or impede the entrance to the hive with brush (grass, tree branches, straw, etc.) so that when the foraging bees leave the hive, they must crawl through the “brush” before they can fly. After a day, remove part of the brush and continue this process until all the brush is removed after three days. They will see the disturbance in the environment and reorient themselves.

It is best to leave the hive in its initial location. Moving the hive will hinder the bee’s production for days and cause stress within the colony. Also note that 10% of queens are lost when moving a hive. Set up the hive in an ideal location that will suit their needs as well as yours. 

Brushy Mountain's Question of the Month: June

Question of the Month

I went out to my hive and noticed a good portion of my bees were gone!!!I saw swarm cells last time I checked, but did not think they would swarm this late into the year. Now, I cannot find a queen anywhere to purchase!
What am I supposed to do with the remaining bees?

Swarming is always an issue a beekeeper must deal with.

• Be alert and add the needed supers when your bees require them (waiting too can allow your bees to become overcrowded).
• Be proactive and have a Cardboard NUC handy... just in case!
• If swarming does occur, there will be a daughter queen remaining with the bees that did not swarm. She will take over as queen of the hive.

The daughter queen will hatch a virgin and must go on a mating flight to become fertile. A mating flight will span the course of 2 – 3 days in which the queen will mate with 10 – 15 drones. If all goes well she will return to the hive and begin laying, in which you will begin to see eggs 1 -2 weeks after your bees swarmed.




As many of us have experienced, things never go well and we must prepare for all things to go wrong. 
Once your virgin queen goes on her mating flight, she may not return.

• A hungry bird, the windshield on a car and many other threats stand in her way.
• If the weather is not excellent, she may not be properly mated when she returns to the hive.

First, beekeepers must check and make sure there are eggs to ensure there is a queen in the hive; Second, you must check the brood pattern to see if she is properly mated. A poorly mated queen may have a spotty brood pattern with multiple empty cells rather than solid with few empty cells or she may be laying drone eggs. If everything appears to be ok, then you know your hive is queen right!

2 alternatives to make sure you come out with a queen right hive:

• If you find that you have a second hive that shows swarming tendencies, you can split that colony and use the queen cells to raise out a queen in the previously swarmed colony (in the case that the swarmed hive remains queenless after 1 – 2 weeks). This will alleviate swarming from your other hive and will give the swarmed colony a second chance at raising out a queen.
• The hive that has, or is about to swarm will develop multiple queen cells. Create aNUC from a separate hive and introduce a frame, with queen cells, from the swarmed hive into the NUC. This will double your chances of having a properly mated queen. If the Swarmed hive or the NUC produces a properly laying queen and the other does not, combine the hives with a NUC introduction board. If both show signs of a queen right colony, you now have a NUC to overwinter with. Great for running a 2 & 1/2 Hives. Larry Conner discusses the advantage of 2 & 1/2 hives in this webinar:

In the end, if you find eggs and the brood pattern looks good, you have a queen right hive.

Honey Bees... LIVE!!

Take an intimate look a life of a beehive. This infrared view of the inside of the hive shows the complex inner workings of the colony as they build combs, produce honey, protect the queen, and raise a new generation of workers and drones. Building their communal home inside a large hollow log, the colony is located in the town of Waal in Bavaria, Germany.

Watch them HERE

Brushy Mountain's "Back to Basics" April

Back to the Basics

You have set up your hives and installed your bees with the queen cage attached to a frame. We know that you are eager to check on them to see how they are doing but disrupting the colony will hinder them. Give them time to acclimate to the new queen and release her on their own (will typically take 5 to 7 days). Once you have given them time to release the queen on their own, you can open up your hive and see your bees hard at work!

When you first open your hive to remove the queen cage, you may notice no substantial changes. Your bees are working frantically to draw out comb, giving space for your queen to lay her eggs and room to store their nectar. There will be some foraging bees sent out to bring in nectar and pollen but the majority of the force will be building up the frames. Providing feed during this time is vital. As the bees work the frames, they will be consuming feed almost as fast as you are providing it for them. Ensure they have the feed they need!
Other things to be aware of:

• Don’t be frightened to find that your colony seems smaller then when you installed it. This is a new colony and it will take them time before they will grow in population. The population will begin to decrease before it starts increasing because the newly laid eggs must be raised out to replace the older bees.
• As the bees begin to work the frames, drawing out foundation, they may draw out a queen cup. There is no reason to fret. A queen cup does not mean your hive is queen-less, but is a precautionary measure your worker bees take to ensure they can raise a new queen quickly if something were to happen with the current queen. A queen cup is a single cup which is located in the middle of the frame, and will not have an or larva inside.
• When you begin working your hive, your first instincts are to look for the queen. The queen is one of thousands of bees throughout the hive. Although she is much larger than the worker bee, she will be extremely hard if not impossible to find. An alternative is to check the frames for eggs. Eggs signify that the queen has been released and is laying. Eggs are also difficult to see (less difficult than finding the queen) but they appear as small white kernels that are similar to rice.

Installing your package is just one of the first steps into this exciting hobby. Once your queen has been released and starts laying eggs, you will begin to see a large field force in your garden, buzzing from flower to flower.
Here are some helpful hints to help you in these beginning months:

• Even though you see that your bees are bringing in nectar and pollen, feed still needs to be provided for the colony. They are still trying to build their honey stores and if there are days when it is rainy, your bees will need that feed. However, you should remove the feeder once you add the first honey super. We want to harvest honey, not sugar water!
• A great looking brood frame will have a central section of brood in different stages. You should find eggs, larvae and capped brood. If you find that your brood frames are spotty (small patches of brood with many empty cells around the brood patches) you could have an under-productive queen. This can happen with a newly installed package, as the queen gets settled into her new environment. If the problem persists, she may need to be replaced.
• Once you find that your outer frames are being worked and comb is beginning to be drawn out on them, it is time to add on the next brood chamber. The rule of thumb is that if 6 to 7 of your frames are drawn out, add the next super. Adding the next story will give your queen the space she needs to lay and can alleviate congestion in the hive.

With the first steps behind you, you will begin to see the true joy of beekeeping. Keep feeding your bees and let them build up in population.  

ORIGINAL SOURCE:  BRUSHY MOUNTAIN 

Brushy Mountain's Question of the Month: April...

Question of the Month

Your hives have made it through winter and are now busting at the seams with bees. Do you continue to add hive bodies and build up your hive? Can you create a split? Should you worry about swarming?

An overwintered hive will begin brood production before winter comes to an end. By the time spring gets here, they will be high in population and ready for the nectar flow. This can lead to the possibility of swarming and requires attention from the beekeeper.
You have two options to help prevent overcrowding in the hive:

• You may continue to build up your hive by adding on the next story. This is an easy option and will build up your hive fast. If the queen is not in the bottom brood chamber, reverse the brood chambers and place honey supers above the brood chambers. Reduce the congestion by giving your bees room to move up into the hive and space for your queen to lay. You still must be cautious of swarm cells and dealing with a honey bound hive.
• Create a split. A split in its simplest form, is the transfer of several frames with mixed brood and frames capped with honey from your mother hive into a new hive. You would replace the transferred frames with empty frames, giving your mother hive space to continue growing. Splitting a colony gives you another hive with a more bees to help pollinate your garden and harvest honey.

Creating a split seems simple, but there are different variations (below is just one example how to create a split) and challenges involved. This is however, a great and convenient way to establish a new colony in your bee yard.

When making a split, you will want to have your equipment setup and ready for the transfer of frames. It is best to grab 4 or 5 frames of mixed brood in various stages of development. This will keep the population going as new bees are hatched and as larvae continues to develop. The hive's survival will be dependent upon the newly hatched bees and developing larvae. Frames of nectar and pollen will be essential in feeding the colony until they are able to increase in population.

When transferring the frames into the split, you do not want to brush off the nurse bees. The nurse bees will be beneficial to help feed and raise out the brood. The bees that are transferred from your mother hive are orientated to the mother hive. Once they fly from the split, they will return to the mother hive. You will want to transfer a good number of nurse bees over to the split because the majority of them will return to the mother hive. This may require you to shake a few extra frames of bees into the split. The bees that hatch out will become orientated to the split colony and will replace the nurse bees that returned to the mother hive.

Right now your split is queenless. You have the option of purchasing a fertilized queen (before you create the split) and introducing her to your split colony. It will take 5 to 7 days before your colony will become acclimated to her, but once she is released, she will begin laying. If you know that you transferred over frames of brood with eggs that are less than 3 days old, your split hive will realize that it is queenless and will begin to raise out their own queen from the fertilized eggs. There are numerous risks in allowing a colony to raise out their own queen.Dangers in raising out a new queen: low drone population, rainy weather, birds, car windshields, ect. Aside from these threats, it can take 2 to 3 weeks before the queen is able to begin laying (if she is properly fertilized). 

After transferring your frames and ensuring your split is queen right, they will continue to grow. The split is a new colony and should be treated as such. Add a feeder to the split and give them time to grow before checking on them. Your mother hive will need to be monitored to ensure it does not become overcrowded. Some beekeepers can create multiple splits from one hive, depending upon the strength of that colony. 

ORIGINAL SOURCE:  BRUSHY MOUNTAIN

Wintering a Beehive in New England with the Gleasons...

Thanks to club members Dan and Joseph Gleason for sharing their new over-wintering experience!

Experimental Natural Beekeeping...

The Sun Hive: experimental Natural Beekeeping

Sun Hives are a hive design coming out of Germany and now gathering interest in Britain. They’re part of the world-wide movement towards ‘apicentric’ beekeeping – beekeeping that prioritizes honeybees firstly as pollinators, with honey production being a secondary goal.

The Sun Hive is modeled in part on the traditional European skep hive, and is aimed at creating a hive that maximises colony health. The main thing I love about this hive and the enthusiasm surrounding it is not the hive itself, but the philosophy behind it, that of apicentric beekeeping.

In brief, the Sun Hive has an upside down skep hive at its base with curving frames in the top section and no frames in the bottom section. The hive is placed well above ground level (optimal for bees – they never choose to create a hive on the ground).

Like a Warré hive, the Sun Hive allows the queen bee to roam freely through the entire hive and lay eggs where she wishes to, which in turn allows the colony to manage the location and progression of their brood nest, which is great for colony health.

The top curved frames of the Sun Hive provide the ability to (in theory) remove each frame, with the free-form comb beneath coming out as well as it is (again, in theory) attached to the frame directly above.

The Sun Hive can also have a super attached to it on a honeyflow (not sure about that, as I assume that means a queen excluder would be used to prevent brood comb being created in said super, which goes against the idea of allowing the queen to roam the hive, but anyway).

As I said, it’s not the design of this hive that particularly gets me going (though it is very beautiful), but the philosophy behind it… putting bees first before honey yields.

Also, this sort of experimenting is important. We cannot keep relying on the industrial style of beekeeping that is currently the norm. Well managed Warré Beehives are one branch of natural beekeeping, and this hive is another.

What we need, right now, is lots of apicentric beekeepers refining, experimenting and progressing resilient beekeeping techniques. Backed up by good information on bee behavior, not just whacky ideas.

Would this hive style work in Australia? I am not sure, but I suspect it might not be ideal for most parts of Australia. And that is ok. Each continent has vastly different conditions – nectarys, climate and other variations that necessitate adaptation for hive design for effective natural beekeeping.

A hive design developed on the other side of the world, no matter how groovy, is not necessarily going to result in a happy and healthy honeybee colony over this side of the world. There’s seasonal differences, the way honeyflows work is different, humidity, etc.

But Natural Beekeeping, in all its global variations, is at the heart of future honeybee health. The Sun Hive is definitely part of that matrix and is causing many in Europe to rethink hive design to ensure colony resilience.

ORIGINAL SOURCE: MILKWOOD

Urban Beehive...

PHILIPS URBAN BEEHIVE

Most of the time you think of beekeepers as living out on large farms, tending to their hives with crazy hazmat-style suits on. With the Philips Urban Beehive, you can become your own beekeeper — with the bees living inside your own house. This stylish concept consists of two parts: an entry passage and flower pot that sits outdoors, and a glass shell inside. The tinted glass shell filters light to let through the orange wavelength the bees use for sight, and holds an array of honeycomb frames inside. When it's time to harvest some honey, just pull on the smoke actuator chain and grab some out while the bees are happily sedated.



The urban beehive is a concept for keeping bees at home. The beehive is designed to allow us a glimpse into the fascinating world of these industrious creatures and to harvest the honey that they produce.
                                      

The design of the beehive is unconventional, appealing, and respects the natural behavior of the bees. It consists of two parts: entry passage and flower pot outside, and glass vessel containing an array of honeycomb frames, inside. The glass shell filters light to let through the orange wavelength which bees use for sight. The frames are provided with a honeycomb texture for bees to build their wax cells on. Smoke can be released into the hive to calm the bees before it is opened, in keeping with established practice.

This is a sustainable, environmentally friendly product concept that has direct educational effects. The city benefits from the pollination, and humans benefit from the honey and the therapeutic value of observing these fascinating creatures in action. As global bee colonies are in decline, this design contributes to the preservation of the species and encourages the return of the urban bee.

To make their hives, bees produce wax and propolis, a resinous mixture that varies with the bees’ environment and diet. Propolis has a structural function but is also believed to inhibit harmful pathogens in the hive and is sold as an alternative medicine. Once the health benefits of honey and propolis are better understood, the urban beehive could also have a role in the home apothecary.

                                                           

Far-future design conceptsThe urban beehive is part of the Microbial Home Probe, a far-future design concept. It is not intended as a production prototype nor will it be sold as a Philips product. Like past Probe Design Concepts that have stimulated discussion around a range of issues, this concept is testing a possible future – not prescribing one. 19 October 2011

ORIGINAL SOURCE: UNCRATE

Trendy Hotels Add Beehives and Chicken Coops...

Beehives on the roof, chicken coops out back. Nope, you’re not on a farm — you’re at one of the growing number of trendy hotels adding to their roster of hipster-friendly amenities.

“Green” hotels have served produce from their own gardens for years, but some are taking it a step further. Across the nation, hotels are cultivating beehives and chicken coops to offer guests fresh — and (hipsters rejoice!) locally sourced — honey and eggs, as well as opportunities to interact with the wildlife (yes, even the bees). Fairmont hotels now have beehives installed on 21 of their rooftops, including those in Washington, D.C., San Francisco, Vancouver, Dallas and San Jose, housing more than 2 million bees and producing roughly 5,000 pounds of honey each year. The Waldorf Astoria in New York has six hives abuzz with roughly 300,000 bees, and The Brown Palace Hotel & Spa near Denver has five hives and 150,000 bees.

Recently, chickens have joined in the trendy hotel offerings, as two California-based resorts installed coops on their grounds this year. Calistoga Ranch in Napa Valley now has 12 chickens living in its reclaimed-wood coop (which also has chandeliers and framed artwork). Carmel Valley Ranch in Carmel Valley installed a chicken coop on its land last month “as a natural evolution of its growing farmstead experience that already includes Italian honeybees.” They also plan to compost the chicken manure.

While such offerings may cater to the foodie obsession with provenance that the IFC comedy series “Portlandia” pokes fun at, hotels say they’re offering these perks to help the environment. Fairmont says it “has been committed to protecting the environment for over 20 years” and that its hives were installed to help with dwindling bee populations. Carmel Valley Ranch says the chicken coop “contributes to the resort’s philosophy of honoring and being of the land.”

But, of course, pleasing locavores can also be a money-making proposition. “The hotel market is increasingly competitive, especially with the competition from Airbnb and non-hotels,” says Andy Brennan, an industry analyst with IbisWorld. In turn, hotels are looking to differentiate themselves from one another, and one way they’re doing this, he says, is with local, organic offerings. “Providing more gourmet, high-end products will impact the bottom line,” he says.

Enter the bees and chickens, which, relatively speaking, tend to be fairly inexpensive to board, as the hotels already have the real estate (lawn or the rooftop) and can train existing staff to care for them. Setting up and maintaining a colony of bees can sometimes cost under $600 the first year, including clothing and equipment for the beekeeper, hives and the bees themselves, says Rick Reault, founder of New England Beekeeping Supplies. After that, it’s even cheaper: Ian Bens, the executive sous chef at the Fairmont Washington, D.C., who also cares for the bees, says that it costs “way less” than $1,000 a year to maintain the hives.

What’s more, the buzz won’t go unnoticed by guests — and many will pay for the bee products featured on hotel menus. At the Fairmont Sonoma Mission Inn & Spa, you’ll find Caneles on the menu, which the hotel describes as a “custardy treat baked in a traditional fluted mold coated with beeswax.” At the Fairmont Waterfront in Vancouver, there are honey truffles (a.k.a. “Bee’s Knees”) and a Honey Lager; at the Fairmont in Dallas, you’ll find honey incorporated into such dishes as the cheese plate, Greek yogurt parfait and the crème brûlée; and the Fairmont in D.C. has a bee-tini (a martini-like drink made with honey), as well as honey butter and seasonal honey desserts. The Brown Palace Hotel & Spa offers a special afternoon tea featuring its honey. The chicken’s eggs will pop up on the resorts’ menus as well: The chef at Carmel Valley Ranch plans to use the fresh eggs in his dishes once the chickens are full grown, and the chef at Calistoga Ranch plans to set up a special omelet station.

Furthermore, the hotels market their coops and beehives in ways that aren’t food-related. For example, the Waldorf Astoria offers a tour of its beehive-filled rooftop. And Carmel Valley Ranch plans to launch educational programs around its chickens, such as how to start and maintain your own backyard chicken coop and how to handle fresh eggs safely. 

ORIGINAL SOURCE: Market Watch

Swarm Cells...

Club members Andy & Joyce are enjoying all the challenges of beekeeping in their first year.  Wanting to experience all the things a new hive has to offer, they started two hives, one from a package and one from a nuc.  Turns out the nuc has been non-stop excitement.  I believe they're up to 3 swarms now.  Andy was kind enough to send these awesome photos of their overzealous hive.  Look at all those capped swarm cells! Luckily, these photos aren't too recent, and Andy & Joyce and one of those new queens seem to have everything under control for now!

Thanks to Andy & Joyce for sharing these photos and thanks to senior club member Eric Nitsch for taking a look at their hives and offering a helping hand.

Insecticide?

Time magazine recently featured the honeybees' struggle on their cover.  It's nice to see the subject getting more and more attention.  

Unfortunately, some of what's killing the bees has recently directly effected one of our members.  HCBA Trustee, Larry Borysyk, recently sent me this photo of the front of his hive. 

All the bees on the ground near the hive are dead.  Larry thinks they may be victims of insecticide.  If so, let's hope the effects on the hive are limited and they recover and gain strength to be ready to over-winter! 

Thanks for sharing this with us, Larry!

My First Marked Queen...

The weather has been getting warmer finally, and while at first I had noticed my bees taking the opportunity to get out and stretch their wings, the last week or so, there seemed to be fewer and fewer bees leaving the hive.  I had been checking in with and feeding my bees on Saturdays for quite awhile, and there seemed to be plenty of bees in the hive when I opened it.  So I started to get nervous when as the weather got warmer, I wasn't seeing more and more bees leaving the hive.  The field bees that were coming and going were bringing in pollen, a good sign, but the traffic still seemed light.    

Last weekend we had beautiful weather, a great time to find out what's really going on in there. I'll be honest, I was nervous to do a full inspection of my hive, afraid to confirm I might be losing it.  So, I called on my support system, fellow HCBA members, Mike Feeney to help with the inspection and Sean Martin (also known as my husband) to take photos and have his shoulder ready just in case I needed to cry on it.  

Mike's first suggestion for me was to reverse the position of my inner cover.  I usually keep the notch on the inner cover facing the back of the hive so I have a rear entrance.  Well when all the bees are using the back door, it's much harder to tell how many are coming and going.  With both entrances facing the front of the hive, it's much easier for me to see who is coming and going without having to go into the beeyard.  I agreed to changing the position of my inner cover, and we went out to open my hive. 

At first glance, things did not look good.  As I feared, the number of bees in the hive appeared to be much fewer than the week before when I last fed them.  Determined to find out what was going on, we pulled out each frame and meticulously looked them over.  There were a lot of empty cells (too many if you ask me) but there were also plenty of pollen and syrup stores, one whole frame up top was almost completely full of syrup.  Unfortunately, there were no signs of brood... Until one of the last frames out of the top box!  Mike spotted some eggs in the lower cells and my spirits were lifted!  What a relief to see those eggs!  When we opened the bottom brood chamber, we found all the signs pointing toward "Queen Right"!  More eggs, and larvae, and then, her majesty herself!  Thank goodness.  Mike is like a beekeeping boy scout and is always prepared, so when we saw the queen, he was already to trap and mark her.  

I have never marked a queen in the past.  My beekeeping philosophy is that if I can see all the queen right signs, I don't look too hard for her because I fear I may do something while searching to compromise her well being.  But... there she was!  And we were prepared!  How often does that happen?  

 Ladies and gentlemen... Queen Daryl Palumbo

So we put everything back together, keeping all the brood in the center, and rearranging some frames so that some of the empty celled frames were closest to where she was laying.   

Switching the inner cover really seemed to help too.  Now I can see all the bees coming and going, and it already looks like more traffic than I originally thought.  

Plus, I know I'm queen right, so I can relax... until next week! 

Bee School Session 2...

Hampden County Beekeepers Bee School January 2013

When: Thursday, January 24th at 7pm

Where:  Willimanset Heights Improvement League (WHIL)

118 Mount Vernon Rd.

Chicopee, MA 01013

This will be our second session of bee school for 2013.

HCBA Members Tom Flebotte and Lee Duquette will cover the topics of PROTECTIVE CLOTHING and HIVE ASSEMBLY.  Hammers are optional!    

All members are welcome to attend. 

Our last bee-school break was a huge success thanks to everyone who brought something!  Those who would like to are again invited to bring a snack to share. 

Bee well!

Jessica Martin

HCBA Secretary

(860) 978-5388

Jessica@pulsetattoo.com

Bill Crawford Photo Update...

Bill just emailed me some photos from his cell phone, so we can all see some of what he's seen on his commercial beekeeping journey.  Feast your eyes...

Keep up the good work, Bill!  And keep those photos coming!

A First Timer's Install...

New HCBA Member, Vanessa Mathieu shared this video of her first install earlier this year.  Vanessa started two hives this year, one standard Langstroth hive and one top bar hive.  Thanks for sharing Vanessa!  

Introducing My Queens...

This is the Martin Beeyard...

We're a small operation.

The hive on the left is our first hive, and the girls who live there over-wintered OK. I was very excited about that and thought it meant I had completed my first year as a successful beekeeper. So, mother nature decided to challenge me. On an inspection about two weeks ago, I noticed open queen cells, and that the frames were too full of honey, and worst of all... NO BROOD! I switched out some of the full frames with some built-out empty frames I had from last year. Maybe if there was a new queen in the hive, she just needed some space to lay? Left it alone for almost 5 days, and upon reinspection, still no brood. Not an egg in sight. I reached out to some of our experienced club members and the reply was unanimous, "RE-QUEEN! RE-QUEEN!" I got a new queen and installed her on Saturday. Introducing Queen Elizabeth Woodville II...

I'm going to check on her tomorrow and hope she's been accepted and freed by her people. Cross your fingers for me!

The hive on the right is our new hive. I installed a package of Italians from Tom on Easter weekend, and they're doing great so far. I've only done two inspections, and I've spotted the queen quickly and easily both times without really looking. This leads me to believe she's a bit of an exhibitionist. Please meet Queen Daryl Palumbo...

*A note on the size difference between my hives... I wanted to be sure I would be able to manage my first hive alone and was a little nervous about the size and weight of everything, so I opted to start with two medium hive bodies and an 8 frame hive. Initially this worked out great. When they needed more space, I added a third hive body, this seemed to prevent them from swarming. In the fall, they gave me 36 lbs. of delicious honey, and they over-wintered well. With an increased level of comfort going into my second year and second hive, I decided to go for deeps on our new 8 frame hive. Hopefully they'll both be a success!