Brushy Mountain's "Back to Basics" September

After storing your honey for several months it now appears cloudy. Do not be alarmed, your honey has crystallized. Crystallization is not an indication of your honey worsening or deteriorating. Crystallized honey is not harmful or expired. Crystallization is the natural process of honey when it leaves the hive. Honey can even crystallize in the hive if your colony is unable to sustain hive temperature in honey super.

You will find that some honeys will crystallize faster than others. Honey is a highly concentrated sugar solution with more than 70% sugar and less than 20% water. Fructose and glucose are the two primary sugars found in honey. Glucose will crystallize faster due to its low water solubility. The ratio of these two sugars will determine how quickly your honey will crystallize. This is why some honeys will last months or years without crystallizing while others will crystallize within weeks of extraction. 

Other factors which affect how quickly honey crystallizes include:

• Temperature. Storage temperature has a huge influence on the crystallization process. Storage temperatures between 50-60 degrees Fahrenheit are ideal temperatures for crystallization. Temperatures below 50 degrees will slow down the crystallization process as the honey becomes thicker. Honey will resist crystallization at higher temperatures above 70 degrees. Crystals will dissolve when temperatures exceed 104 degrees Fahrenheit.
• Particles. During extraction particles of debris are caught by the honey. Pieces of beeswax or pollen grains will act as a base for the glucose crystals. Unfiltered honey contains a higher number of particles; therefore, it will crystalize faster than finely filtered honey. Also consider the particles in air and be sure to allow your honey to settle before bottling to allow air bubbles to be released.

Honey can be returned to its lucid form if it becomes crystallized. Gently warm the honey by placing the bottle into a water bath or, depending on size of container, a sunny window. Do not heat honey beyond 104 degrees or it will destroy enzymes, begin to caramelize the sugars and alter the flavor. Heat the water bath slowly and bring the temperature of honey up to 95 degrees Fahrenheit. Heating must be done with care if the honey is to retain its nutritional value. If you have left your honey in pails, use a melt belt to bring the honey temperature up to a safe range or use a honey bottler & liquefier as a double boiler.

Some honey enthusiasts enjoy honey in its crystalized state. It is easier to use in cooking and will spread better on toast. See what your customers prefer.

Brushy Mountain's Question of the Month: September

This has been one of the best honey flows in the past couple of years. Everyone who we have spoken with has been able to extracted at least one super of honey. In the North Carolina region, many beekeepers have commented that they were able to harvest a sourwood crop. Believe it or not, too much honey can be a problem. What is the best way to store it? What works best when labeling and marketing honey?

What are you going to do with all the excess honey now that you have finished extracting and bottling? Of course you will want to keep some for yourself but how should you sell the rest? The presentation of your honey can generate a demand to help you avoid a surplus. Whether you sell your honey or give it as a gift, presentation is important.

• The Right Jar. There are many varieties of jars and everyone will target a specific audience. Classic, Muth and Hexagonal are elegant glass jars that will increase the value of the honey. The Plastic Classic and Flat Panel Bears are more commonly known and tend to be more cost efficient. Consider that the jar is not only for containing your honey but also for display. Ensure it is clean and clearly shows your honey. An embossed design will help your jars stand out from competitors. Check out our newEmbossed Hourglass Jars for a unique design.


• The Right Size and Top. Not everyone wants to buy 2lbs. of honey that they have not had before. The 2 oz Mini Bear is a good size sampler that sells great and if they like it enough, they will be back for more! Offer more sizes (1lb, 12oz, 8oz…) so your customers can choose how much they want. Would you prefer a flip top style lid or ahi-flow spout cap when dispensing your honey? Would your customers enjoy the same as you? This may be a test year so that you can better understand what your customers would like next year.


• Label It. When you’re not there to talk about your honey, your label will be speaking for you. A label makes your jar look professional! Let your customers know it is pure and natural honey from your hives. Give them the contact information in case they want more next year. Use the correct size label for your jar. A panel bear label does not visually fit on to a 2 lb. jar. Add the tamper proof seal so your customers will be confident in the honey’s integrity.
  
  Most states have labeling requirements when selling honey. They require certain information pertaining to your honey. Honey is sold by weight not volume, such as fluid ounces.


• Other Products. Don’t stop with just your honey. You will do better is you have a variety of products. Throw in those bars of soap you made with your soap making kit, light thecandle you made from the wax in your hive, open up the mead you made with your honey. Sell the fruits and vegetables your bees helped pollinate. Offer them more than honey and provide the story behind it!

What should you do if you did not sell all your honey? Will it go bad before next year? Storing honey is easy. Store it at room temperature, out of direct sunlight, and in a tightly sealed container. Wipe off any drips or leaks that will attract insects before storing the honey. Do not fret if you return later to find your honey is cloudy. Honey is not a perishable item but it will crystallize. Read Back to the Basics to better understand crystallization.

Brushy Mountain's "Back to the Basics" August

Back to the Basics: Fall Management Prep

One of the perks of beekeeping is being able to harvest honey. We know that bees store an excess amount and they will continue storing nectar and pollen as long as there is room. At what point should we say ‘that’s enough’ and begin preparing the hive for winter? Your colony can only store what is being provided. As your queen’s laying begins to slow and your colony dwindles down, the population will not be able to accommodate a larger hive. Adding that next super on might not be the best for your colony. 

Your queen will continue laying eggs as long as the resources are available to sustain the colony. Once there is a drop in both nectar and pollen, drones will be removed from hive and the queen will begin to reduce the amount she is laying. Any supers that are not filled with honey or brood may become neglected. How do you keep them building? 

It is nice to have your bees moving up the hive, working the frames and storing honey but once their food source runs out, what is their incentive? Now is the time to prepare your feeder for the sugar water mixture or corn syrup you will be providing. Honey bees require proteins, carbohydrates, lipids, vitamins, minerals, and water. Larvae and queens are fed a diet of royal jelly secreted by young nurse bees’ hypopharyngeal glands. This milky white acidic substance has a high moisture content and is very rich in protiens, lipids, B vitamins, C vitamins, sugars, and minerals that are not fully found in sugar water or corn syrup. There are several nutritional supplements which incorporate these needed nutrients to maintain a healthy colony. Here are some mixtures for your feed: 

• Honey B Healthy. This feeding supplement is used in spring and winter to stimulate the immune system. This feed stimulant with essential oils prevents mold and fungus in sugar syrup, calms bees when used as a spray, builds colonies when fed during dearth and much more. The scent of spearmint and lemongrass will attract your bees to feed almost immediately.
• Amino B Booster. A blend of free amino acids that assimilates rapidly and directly through the mid gut to the bee’s hemolymph and hemocytes, then transported to the sites where protein is needed for bee growth. Amino B Booster provides your bees the nutrients they need when pollen is scarce or lacks the nutrients bees need.
• Vitamin B Healthy. Helps provide needed nutrients vital for bee health especially when pollen sources are scarce or the pollen lacks the essential nutrients the bees need. Helps build strong healthy colonies for maximum honey production and pollination or can be used to help build up weak, over-winterized colonies, packages, nucs or swarms.
• Hive Alive. A feed to help bees maintain colony strength. Prevents syrup from fermenting and helps bees absorb the nutrients, proteins and sugars needed to increase brood production. Hive Alive strengthens the bees’ immune system to help manage intestinal issues and other diseases.

A colonies health is as essential for winter survival as are the food stores they will need to survive. Providing the necessary feed the will need along with a good supplement will go along way to keep your hive healthy and strong.

Brushy Mountain's Question of the Month: August

Question of the Month: Mites

Summer is drawing to an end and fall will soon be coloring the trees. Beekeepers are taking off their last supers of honey and preparing their hives for winter. Every year we harp on the importance of treating for Varroa Mites but when is the correct time to treat? 

It is best to know your mite count before you begin treating. Mites have been able to develop a resistance to some of the products on the market. If you know your mite count before and after you have treated, you can determine if you were successful. Here are two options to obtain a correct mite count:

• Corex Sheet. This is a sheet which slides under a screened bottom board. Spray the corex sheet with cooking oil and as the mites fall from the hive, the mites will stick to the sheet and can be counted easily. Remove sheet after 3 days to get a total count of mites. Divide total by 3 to get the average mite drop in a 24 hour period.


• Sugar Shake. Place a few tablespoons of powdered sugar in a mason jar, add ¼ cup of bees and gently "slosh" the bees around ensuring they are fully coated. Replace the lid with #8 hardware cloth and shake the bees down over a white sheet of paper. The sugar will dislodge the mites allowing them to fall through the screen. This will give you an average mite count for your hive.

Below is a very general guide to determine if the colony should be treated.

Sampling Method	Spring	Fall
Corex Sheet	5-10 mites	50-60 mites
Sugar Shake	3-4 mites	10-12 mites

This is the time of year to begin treating for varroa mites if your count falls above or near the general guide. Treatment in early fall is vital for a healthy winter colony. The virus that persists after the mites have been treated is what poses the real threat for winter loss. It takes a few generations of brood rearing for virus levels to reduce. If you wait until late fall to reduce the Varroa population, due to the viruses, you will still have unhealthy bees going into winter. The best time to deal with the mites is late August/early September depending on your location. 

Top Treatments for Varroa Mite:

• 1. Soft Chemicals: An effective treatment while leaving the least amount of residue. We offer Api Life Var and MiteAway Quick Strips. Both are 95% effective, however, both work through the evaporation of essential oils or organic acids, thus making themweather sensitive.


• 2. Hard Chemicals: Will kill the Varroa Mites but label instructions must be followed and do not leave on longer than recommended. We supply Apistan Strips, Check Mite Plus and a newer treatment, Apivar. Keep in mind varroa have shown a resistence to Apistan and Check Mite upon continuous use.


• 3. Non-Chemical: Beekeepers have been using powdered sugar to monitor mites but if heavily dusted with a Dustructor, it can control the mite population. The Varroa reproduction is directly tied to the bee reproduction cycle. Because drones are capped longer as brood, the Varroa are more attracted to drone brood where they can lay more eggs. Using Drone Foundation or a Drone Frame, you can wait until the brood is capped, remove and destroy the foundation. Non-chemical or IPM techniques can be effective to control mites; however, they require dedication and time to be successful.

Brushy Mountain's "Back to the Basics" July

Back to the Basics: Bearding

Hot and humid weather is hard on the bees during the summer months. Honey Bees can only do so much to help regulate the hive temperature at 90-95 Degrees Fahrenheit. When the colony is at its max population and internal hive temperatures continue to rise, clusters of bees will try to escape the heat of the hive and hang out at the entrance of the hive. This can be misinterpreted as swarming when in fact it is bearding.
Why do bees beard?

When you find bees clustering or hanging at the entrance of the hive, they are bearding. This gives the appearance of the hive having a beard. Some colonies will cover the entrance where others will hang from the bottom board. Colonies will create these beards outside the hive when the inside becomes overcrowded, hive lacks ventilation, or temperatures become too high. Honey Bees typically do this to help maintain the brood nest temperature. Brood requires a certain temperature and will not survive if it becomes too hot or too cold.

How do bees regulate the hive temperature during Summer and how can Beekeepers help?

Have you ever seen a bee at the entrance of the hive beating her wings but not taking flight?She is fanning the hive. Bees will collect water to use for evaporative cooling. Bees will face away from the entrance of the hive and begin fanning. The airflow that is created from the bees beating their wings will evaporate the water droplets throughout the hive. Whenever you find bees fanning at the entrance, know that there are many more inside fanning as well.

Bees can only do so much to reduce the heat in the brood nest. Beekeepers must provide sufficient ventilation for the hive. Here are some tips and tricks for beekeepers to help fight the summer heat:

Nothing can beat a screened bottom board. Airflow is able to move up through bottom board and can significantly help with hive temperature. The screened bottom board is only useful if the screen is left open. Be sure to remove the corrugated sheet used for mite counts.

Ventilate the top as well as the bottom with a ventilated inner cover.Heat rises and the ventilated inner cover offers the space the heat needs to escape. The inner cover props up the hive top allowing airflow to move up and through the hive.

Open up the hive entrance. Larger entrances are better for the summer heat. This provides more fanning space and less congestion for incoming bees.

Allow for more bee space by reducing the number of frames. Consider using 9 frames in your 10 frame hive or 7 in your 8. This will open up space between the frames and better ventilate your hive.

Give your hive some shade. Provide a source of shade especially if the hive is in direct sunlight during the entire day. The sun beating down on the hive makes it difficult for the bees to maintain hive temperature. Open up your upper entrance. This small vent will allow heat to escape the hive and provides an alternate entrance/exit for your bees.

Use light color paint for your hives. Dark colors will absorb heat while lighter colors will reflect the sun’s heat.

Have a reliable source of water near your bee yard. Bees can use up to a quart of water during a hot day to keep the hive cool. Keep the water supply filled and in a shaded area.

Summer heat will keep the bees constantly working to maintain the hive temperature and reduces the number of bees able to forage for nectar and pollen. Help the bees regulate hive temperature and give them a stronger field force to bring in the feed they need. 

ORIGINAL SOURCE:  BRUSHY MOUNTAIN

Brushy Mountain's Question of the Month: July

Question of the Month: Extracting 

This is the time of year when beekeepers are pulling off honey supers and uncapping their frames to extract. Beekeepers always want to know the best way to uncap their frames and what size extractor they will need. This deals with many personal decisions that we cannot make for you, however, here is some ‘food for thought’.

Let’s start with uncapping. The number of frames you are uncapping and the time you want to spend during this step is dependent upon the method you should proceed with. 

Using a Cappings Scratcher is an easy method to work small sections of capped honey at one time. Slide the forks underneath the comb at a horizontal angle and lift vertically to remove cappings. Many beekeepers will scrap the forks against the comb to open the cells.Please note this damages the comb and requires more cleanup from your bees.

A Cold/Hot Knife will slice away larger sections of capped honey from the frame. Place at a slight angle along the top and move down the frame in a sawing motion. Be careful not to ‘dig’ into the comb or tear apart the frame. The Cold Knife has a serrated blade and can stick if not kept clean. The Hot Knife is temperature sensitive and will melt away the wax. Preheat before use. A Cappings Scratcher may be needed for unevenly drawn out sections of the frame.

The Rolling Uncapper will roll over the capped honey and pierce the cappings. Allow the cappings to be pierced by pulling or pushing the Rolling Uncapper parallel to the frame. Do not push roller into the frame. Clean central bar if roller begins to resist in rotating.

If time is of importance, the Sideliner Uncapper is a quick and easy method. Run your frames through the roller blades and both sides of your frame will be uncapped. This does not require you to hold the frame and all the debris is caught in the container underneath the sideliner uncapper. A Cappings Scratcher may be needed for unevenly drawn out sections of the frame.

Let’s discuss extractors. Beekeepers new to the hobby are always excited about their first extraction but are unsure on how to proceed. Do I need an extractor? What size extractor should I get? Which is better, hand cranked or powered? There are three main questions you need to ask yourself and the answers will point to the extractor that best fits you.

How many hives do intend to have?
You do not want to outgrow the extractor. You may have five or ten hives currently but you are expecting to expand your bee yard to thirty hives. By the time you reach your thirty hives you do not want to look back and wish you got the bigger extractor.

What is your budget?<br> Let’s be realistic, an extractor is a large investment. There are different alternatives if an extractor isn’t in your budget. You may be able to borrow/rent an extractor from your local bee association; you can uncap and let the honey drain from the frames; you can strain your comb through cheese cloth; other methods are available. 

How do you value your time?
Extracting is not a ten minute process that will happen in an afternoon. Each extractor will hold an allotted amount of frames. The more frames an extractor will hold the less cycles you will need to run to extract the honey from the frames. Do you have time to run through thirty extractions on a compact extractor or would it be beneficial for you to run six on an 21-frame extractor.

We have developed a Extracting Chart that shows the amount of time needed to extract with each extractor. The time depicted is for running extractor and does not include time needed for uncapping, loading, unloading, and any other actions needed for extracting.

Time consumption for the extraction depends on the Extractor being tangential or radial. Tangential extractors seat frames parallel to the center and only extract one side during the spin cycle. Radial extractors seat frames perpendicular to the center and will extract both sides at once.

Anticipate the numbers you will have in the future before you purchase the extracting equipment you need. 

Brushy Mountain's "Back to Basics" June

Back to the Basics:  Moving Your Hive

Beekeepers will get their hives all setup and painted in a certain location, but sometimes it is not the desired location or they want to move their bees to a different area with a better honey flow.
Either way, sometimes it is necessary to move your hive.

Once bees become established in a certain location, they will go on orientation flights. They start off in small circle, flying back to the hive, and grow the circle until they are set on the location of the hive. Moving a hive will disrupt where the bees are oriented to and beekeepers can lose many foraging bees (Beekeepers hate losing bees!). If you intend to move your hive, we suggest following the rule of 3 (up to 3 feet or over 3 miles). If you move a hive across your 10 foot yard, the bees will return to where the hive was originally located.

If you are intending to move your hive, no matter how far, screen off the entrance the night before with hardware cloth. Your foraging bees will come back to the hive at night and will be leaving when the sun comes up. Screen off the entrance at night so you will be transporting all your bees (inevitably there will be a few stragglers left behind). Don't strain when moving your hive, use a hive carrier or a hive strap to make moving easier.

If you intend to move your hive across your yard or a short distance away from its original location, you must move it off site (over 3 miles away) for a week and then move it back to where you find more suitable. If you intend to move it to a separate location for a better/different honey flow, ensure that you are moving it further than 3 miles from its original location.



Wait... there is another way?
Sometimes it is difficult to continuously move your hive. 

If your desired location happens to be further than 3 feet and less than 3 miles (a.k.a. across the yard), you can use a different method. To trigger the bee’s orientation flight, the environment outside of the hive must be significantly different. Obstruct or impede the entrance to the hive with brush (grass, tree branches, straw, etc.) so that when the foraging bees leave the hive, they must crawl through the “brush” before they can fly. After a day, remove part of the brush and continue this process until all the brush is removed after three days. They will see the disturbance in the environment and reorient themselves.

It is best to leave the hive in its initial location. Moving the hive will hinder the bee’s production for days and cause stress within the colony. Also note that 10% of queens are lost when moving a hive. Set up the hive in an ideal location that will suit their needs as well as yours. 

Brushy Mountain's Question of the Month: June

Question of the Month

I went out to my hive and noticed a good portion of my bees were gone!!!I saw swarm cells last time I checked, but did not think they would swarm this late into the year. Now, I cannot find a queen anywhere to purchase!
What am I supposed to do with the remaining bees?

Swarming is always an issue a beekeeper must deal with.

• Be alert and add the needed supers when your bees require them (waiting too can allow your bees to become overcrowded).
• Be proactive and have a Cardboard NUC handy... just in case!
• If swarming does occur, there will be a daughter queen remaining with the bees that did not swarm. She will take over as queen of the hive.

The daughter queen will hatch a virgin and must go on a mating flight to become fertile. A mating flight will span the course of 2 – 3 days in which the queen will mate with 10 – 15 drones. If all goes well she will return to the hive and begin laying, in which you will begin to see eggs 1 -2 weeks after your bees swarmed.




As many of us have experienced, things never go well and we must prepare for all things to go wrong. 
Once your virgin queen goes on her mating flight, she may not return.

• A hungry bird, the windshield on a car and many other threats stand in her way.
• If the weather is not excellent, she may not be properly mated when she returns to the hive.

First, beekeepers must check and make sure there are eggs to ensure there is a queen in the hive; Second, you must check the brood pattern to see if she is properly mated. A poorly mated queen may have a spotty brood pattern with multiple empty cells rather than solid with few empty cells or she may be laying drone eggs. If everything appears to be ok, then you know your hive is queen right!

2 alternatives to make sure you come out with a queen right hive:

• If you find that you have a second hive that shows swarming tendencies, you can split that colony and use the queen cells to raise out a queen in the previously swarmed colony (in the case that the swarmed hive remains queenless after 1 – 2 weeks). This will alleviate swarming from your other hive and will give the swarmed colony a second chance at raising out a queen.
• The hive that has, or is about to swarm will develop multiple queen cells. Create aNUC from a separate hive and introduce a frame, with queen cells, from the swarmed hive into the NUC. This will double your chances of having a properly mated queen. If the Swarmed hive or the NUC produces a properly laying queen and the other does not, combine the hives with a NUC introduction board. If both show signs of a queen right colony, you now have a NUC to overwinter with. Great for running a 2 & 1/2 Hives. Larry Conner discusses the advantage of 2 & 1/2 hives in this webinar:

In the end, if you find eggs and the brood pattern looks good, you have a queen right hive.

Brushy Mountain's "Back to Basics" May

Back to the Basics

It is amazing to know that the honey bee will travel between 2 to 3 miles in search of nectar producing flowers. This distance for a bee to travel is extremely far. Would it not be more beneficial to have a flowering garden closer to home for the bees to pollinate and forage? But what flowering plants are the honey bees attracted to?


Provide the best bee-friendly garden:

• Choose the right plants: When selecting bee-friendly plants for your garden, you want to consider what will be useful for the bees. Flowering plants will be highly melliferous but are they all beneficial for honey bees? They may produce nectar and pollen but the shape and size of the flower may prevent the honey bee from visiting them.
  Bees enjoy flowering herbs, berries and many flowering fruits and vegetables but they will also travel through surrounding wildflowers. If you have the space, planting any type of fruit tree or other blooming trees such as maple, tulip poplar, sourwood, willow, black locust, sumac, and basswood are all good food sources for your bees. Look into different nectar producing plants for your state.
• Consider Blooming Season: You will want to offer a range of plants in different blooming seasons. Have an early spring bloom, summer and fall so the bees will have a continuous food source. Some plants will have a short infrequent bloom whereas others will have a long rich bloom. The longer the bloom, the more frequent visits it will receive.
• Weeds and Wildflowers are your Friends: When you have noticed your bees bringing in pollen and nectar but you know your garden is not in bloom, you always wonder where they are getting it from. Look around your yard for dandelions or clover;these are vital plants for bees. Your bees will also forage through the native wildflowers.
• Be Conscious of What You Spray: Many pesticides are toxic and can be harmful or deadly to your bees. If there are no other options to using pesticides, use them in the evening so the field force are not carrying the chemicals back into the hive.Do not place pesticides directly onto blooming flowers and try using less toxic or rapidly degradable pesticides. There are different formulations that can be used to reduce bee exposure (solutions, emulsifiable concentrates, and granulars are the best to use). Mention this to your neighbors as well.

When planning your garden, consider how you can accommodate more bee friendly plants. Check on the blooming season of flowers and what vegetation will grow in your area. Providing a bee-friendly garden is as simple as planting small patches of wildflowers, herbs, or a flowering vegetable garden. Start planting your garden for your bees. 

Brushy Mountain's Question of the Month: May...

Question of the Month

It is always exciting to find a swarm (except if it is from your hive) because, as a beekeeper, you know those are free bees. Swarming is a natural means for a colony to reproduce. Bee colonies are considered superorganisms and may swarm/reproduce several times throughout the season. Swarming season will typically happen after the queen has made it through winter, leading into the spring or early summer months. A newly established colony does not have the tendency to swarm but may, if they become overcrowded. When working the frames in a beehive, you can find swarm cells clustered together along the bottom edge of a frame.

When a hive decides to swarm, they will send out scout bees in search of a new home. This process can happen very fast (within a few hours) or they may search for a couple of days before finding a suitable home. While scout bees are searching for the next home, the swarm will find temporary resting points relatively close to their original hive (roughly 50 to 100 feet). Generally, swarms will find shelter on tree branches but can find rest on any style structure.This is your time slot to go out and capture them! Grab your NUC (cardboard orwooden) to put them in and head their way.

So, you have located a swarm, what do you need to do when you find this swarm?
A swarm may seem overwhelming and frightening but during this stage, they are not aggressive. Locate the swarm, they may have landed 1 foot off the ground or they could be 80 feet up in a tree. Access the situation and determine if the bees can be acquired safely. 

Here are some things to consider:
• Use Protection: You never know when a mistake will be made, therefore, wear your protective equipment. You are handling thousands of stinging insects that may become aggressive. Wear your veil and gloves (depending on comfort level with bees)and remind any spectators that bees can sting.
• Remember, Safety First: Bees will not always land in an ideal location. If a ladder is required, use your best judgment to determine how best to retrieve the swarm(a branch may need to be cut off). Other options may be available if a ladder seems too risky (like the Hipps Swarm Retriever).

 

You have spotted the swarm and are ready to transfer them into your NUC.

Here are some tips how:
• Swarms on Branch Accessible from Ground: Lay a white sheet out below the swarm. Take your NUC box and determine if the swarm is small enough to bump into the NUC. If it will fit perfectly, go ahead and give it a couple bumps to dislodge the swarm from the branch. If it exceeds the NUC box, try to get the center cluster inside the box, leaving the outskirts to fall onto the sheet.
• Swarms on Branch Accessible by Ladder: Place a white sheet below the swarm. Stand ladder on top of the white sheet so that you can easily reach the swarm.Determine if the bees can be acquired safely. Safely carry the NUC box up the ladder to dislodge the swarm into the NUC (best done with two or more people for support).
• Swarms on Something Other than a Tree Branch: They may have come to land on a fence post, roof overhang, or even on the ground. The main objective is to transfer the large cluster without disrupting them continuously. The best procedure is to spray them down with a sugar water, making it difficult for them to fly. Lay out your sheet below the swarm (as best you can) and brush them into the NUC. Try to acquire the main cluster in the beginning and then retrieve the bees on the fringes.

The sheet is placed underneath the NUC in order to catch any bees that didn’t make it into the NUC. The sheet will also help any stragglers find their way to the main cluster. Take your NUC and the sheet to where you intend to place the colony. At this point if you are using awooden NUC, you can leave them be until they are fully established. Add the frames that are needed and place the top on.

If you are using a cardboard NUC, you will need to transfer them into a permanent 8 frame or 10 frame hive. Place the sheet so that it leads to the entrance of their new hive and set the NUC so that the opening faces the hive. The bees will walk right up the sheet and into the hive. 

Capturing the Queen is Key! To successfully acquire the swarm, you must retrieve the queen. She is likely to be in the center of the swarm, surrounded by the cluster of bees. She will be extremely hard to determine or locate, as she will have lost weight in order to fly. After capturing the swarm, check back in a couple weeks to ensure she is laying. Treat this as a new colony and FEED, FEED, FEED!

This is the time of year when colonies tend to swarm and they can swarm more than once throughout the season. Check out our other blogs about swarm prevention:
Dealing with a Swarm
Seizing the Swarm

If your colony does swarm, have your NUC box handy to go out and retrieve it. Check the hive that swarmed and ensure that they are left with a laying queen. Now one hive just became two! 

Brushy Mountain's Question of the Month: April...

Question of the Month

Your hives have made it through winter and are now busting at the seams with bees. Do you continue to add hive bodies and build up your hive? Can you create a split? Should you worry about swarming?

An overwintered hive will begin brood production before winter comes to an end. By the time spring gets here, they will be high in population and ready for the nectar flow. This can lead to the possibility of swarming and requires attention from the beekeeper.
You have two options to help prevent overcrowding in the hive:

• You may continue to build up your hive by adding on the next story. This is an easy option and will build up your hive fast. If the queen is not in the bottom brood chamber, reverse the brood chambers and place honey supers above the brood chambers. Reduce the congestion by giving your bees room to move up into the hive and space for your queen to lay. You still must be cautious of swarm cells and dealing with a honey bound hive.
• Create a split. A split in its simplest form, is the transfer of several frames with mixed brood and frames capped with honey from your mother hive into a new hive. You would replace the transferred frames with empty frames, giving your mother hive space to continue growing. Splitting a colony gives you another hive with a more bees to help pollinate your garden and harvest honey.

Creating a split seems simple, but there are different variations (below is just one example how to create a split) and challenges involved. This is however, a great and convenient way to establish a new colony in your bee yard.

When making a split, you will want to have your equipment setup and ready for the transfer of frames. It is best to grab 4 or 5 frames of mixed brood in various stages of development. This will keep the population going as new bees are hatched and as larvae continues to develop. The hive's survival will be dependent upon the newly hatched bees and developing larvae. Frames of nectar and pollen will be essential in feeding the colony until they are able to increase in population.

When transferring the frames into the split, you do not want to brush off the nurse bees. The nurse bees will be beneficial to help feed and raise out the brood. The bees that are transferred from your mother hive are orientated to the mother hive. Once they fly from the split, they will return to the mother hive. You will want to transfer a good number of nurse bees over to the split because the majority of them will return to the mother hive. This may require you to shake a few extra frames of bees into the split. The bees that hatch out will become orientated to the split colony and will replace the nurse bees that returned to the mother hive.

Right now your split is queenless. You have the option of purchasing a fertilized queen (before you create the split) and introducing her to your split colony. It will take 5 to 7 days before your colony will become acclimated to her, but once she is released, she will begin laying. If you know that you transferred over frames of brood with eggs that are less than 3 days old, your split hive will realize that it is queenless and will begin to raise out their own queen from the fertilized eggs. There are numerous risks in allowing a colony to raise out their own queen.Dangers in raising out a new queen: low drone population, rainy weather, birds, car windshields, ect. Aside from these threats, it can take 2 to 3 weeks before the queen is able to begin laying (if she is properly fertilized). 

After transferring your frames and ensuring your split is queen right, they will continue to grow. The split is a new colony and should be treated as such. Add a feeder to the split and give them time to grow before checking on them. Your mother hive will need to be monitored to ensure it does not become overcrowded. Some beekeepers can create multiple splits from one hive, depending upon the strength of that colony. 

ORIGINAL SOURCE:  BRUSHY MOUNTAIN

Brushy Mountain's Back to Basics March...

SPRING CLEANING

Hives are beginning to replenish their winter losses before spring arrives.This is the ideal time to do some spring maintenance for your hive. Temperatures fluctuate during March but we will begin experiencing warmer temperatures. Choose one of these warmer days (above 50 degrees F) and head out to your hive.

Over the course of winter, your cluster would have been migrating upward in the hive,consuming their honey stores. This can place the majority of brood nest in an upper super. Beekeepers will want to reverse the boxes so that the brood nest is on the bottom, creating the sense of more space in the hive for your queen to move up and lay into.This will lessen the possibility of swarming.
If your brood nest is mainly clustered in your bottom box, there is no need to reverse boxes.

While we are working the hive, checking the brood and honey stores, why not do some cleaning?
Here are some ideas for you:

• With minimal brood and stored honey, this is the time to cull out some old frames and foundation. Foundation becomes dirty and will absorb chemicals and diseases.This needs to be replaced every 3 to 5 years, and this can be accomplished by replacing 1/3rd to 1/5th of your frames every year.
• Make your hives more functional by cleaning off burr comb from frames, feeders and queen excluders.
• Your bees will be cleaning frames, preparing for the nectar flow. Sometimes they do not remove the debris completely from the hive and its left on the bottom board. Help the bees and clean off the bottom board.
• Every beekeeper tries to save money by using equipment, year after year, however, there does come a point when you need to replace it. When you see rot in the wood or gaps between supers, it needs to be replaced.

Spring is getting closer and your colony is beginning to grow in population. Your bees are out foraging for nectar and pollen. You are ready for the beekeeping year to begin!

Here are some other things to consider:

• If the adult population coming out of winter is small, the brood rearing will start off slow. The small population must keep the brood warm and with empty space throughout the hive, they will have a hard time. Reduce the size of the hive until they grow in population.
• Food Stores need to be maintained. We harp on this every year as winter comes to an end. This is vital to the production of brood and the survival of your hive.Checking the food stores is important until you find that your bees are bringing in nectar, ignoring your supplied feed. They much prefer nectar compared to sugar water or corn syrup.
• Swarm Management. As the colony continues to grow in population your hive can become overcrowded. This can lead to swarming. Add the next super on before the bees get crowded.

ORIGINAL SOURCE:  BRUSHY MOUNTAIN

Brushy Mountain's Question of the Month March...

I treated my hive for Varroa Mites in the fall, do I need to do the same in the spring?

The Varroa Mite population directly ties to bee production. As the queen begins to lay heavily, trying to reach maximum population before the nectar flow, the Varroa mite population will also rise.

• Female mite enters a cell of maturing bee before it is capped
• She waits 60 hours before laying eggs (lays an additional egg every 30 hours)
• First egg will be male and subsequent eggs will be female
• Mites will feed on the pupating bee (this can infect bee with viruses)
• Female mites will exit with adult bee

Every hive needs a thorough inspection to ensure that the mite population is not overwhelming, diseases are not found, and there is a strong population of bees in your colony. With continuous production of brood, the mite population will grow faster and be larger.
The Varroa Mite creates open wounds on the bee, leaving the bee more prone to infection, as well as vector (transferring) viruses, which compromise the health of the bees and the entire colony. 
There are several ways to check for mites within your colony:

Sugar Shake. Place a few table spoons of powdered sugar in a mason jar (replace the lid with #8 hardware cloth) along with roughly ½ cup of bees (around 300 bees) and gently "slosh" them around, ensuring they are fully coated. The sugar will dislodge the mites,allowing them to fall through the hardware cloth onto a clean surface. Count the mites that are dislodged from the bees; if the mite count exceeds 3, treatment is recommended.

Corex Sheet. This is a sheet which slides under a screened bottom board. Spray the corex sheet with a cooking oil so when the mites fall from the hive they stick to the sheet and can then be counted. Insert the sheet for 3 days and then remove it to count the mites. Once you have a total, divide it by 3 to get the average mite drop in a 24 hour period ; if the mite count exceeds 10, treatment is recommended.

If this is your first year in beekeeping or you just purchased a NUC or a Package, and you received your bees from a reliable source, they would have already been treated for mites prior to your pickup, but may still have mites; however, these colonies should not need treatment until late summer/early fall. 


Treatments

Integrated Pest Management (IPM) methods work with the behavior and biology of the target pest to aid in its control. Several methods that can control the mite population include:

• A screened bottom board which allow the mites to fall out of the hive
• Drone trapping/Varroa trapping using a Drone frame or Drone foundation
  Remove frame after cells have been capped and freeze for 48 hours. Reinstall frames after thawing.

IPM methods often are not a sufficient form of control and more traditional methods need to be used. We, and many in the scientific community, strongly encourage the use of “soft chemicals”. These are naturally occurring products and many naturally existing in honey. The two most common are:

Api Life VAR. Api Life VAR is made with thymol, which is used in mouthwash, and other essential oils. Evaporative wafers are placed on the hive and the thymol vapor kills the varroa.
MiteAway Quick Strips. MiteAway Quick Strips use food grade formic acid, which naturally occurs in honey.
Other treatments, such as Apistan and Check Mite Plus, are on the market but resistance has been documented; therefore, further monitoring is necessary. A newer treatment, Apivar, is labeled to kill 99% of mites with a single treatment.

Monitor your mite count and if infestation is high, treat as needed. 

ORIGINAL SOURCE: BRUSHY MOUNTAIN 

How Often Do You Inspect Your Hives?

In the most recent Brushy Mountain News Email, they've added a section called Tips for Success.  Beekeepers from all over can submit their tips and the winner is then chosen monthly by Brushy Mountain.  The winner's tip is published in the newsletter and they receive a discount on an order.  That seems like a good deal so if anyone wants to submit, the info is included below. 

I found the winning tip to be an interesting one.  It's got me wondering how often our new beekeepers are inspecting their new package hives, how often our more experienced members would check a packaged hive, and if I'm checking my new package hive too often.  Please comment below.

From Brushy Mountain's News Email

This is a new section that we have added to the e-flier and we are turning to you to help us with it. We are asking you to submit to us your tips, tricks, and keys to successful beekeeping. Each month we will select a winning entry and publish it in the subsequent e-flier giving credit to the winner. The winner will also receive 10% off their next order. 

Entries must be emailed toinfo@brushymountainbeefarm.com with "Tip for success" in the subject line. Please include a day time phone number at which you can be reached should you be chosen as the winner. 

This month's winner is Dean Pearson.  Dean's tip for success speaks to the beekeepers who are unsure on when or how often it is needed to check on a colony. Dean mentions that in his third year as a beekeeper, he noticed that after replacing or starting a new colony, it is best to visit the hive as little as possible. In the email Dean States: "Last month I replaced three hives that I lost over winter with packages of bees. I know that some beekeepers want to get back into the hive and check on things; my advice is to let them be. I'll only go into my hive once after installation to remove the queen cage and make sure she has been released. I won't check on the hive until I think they are ready for more supers".

Every time you visit your hive, you disrupt the colony and set them back two to three days in production.

For a newly installed colony, over working the hive will interrupt the efficiency of your colony,slow the building of comb and growth. After installing a package it is not necessary to check on them daily. Go in about a week after installing the package to remove the queen cage and verify she is laying. Your colony will need weeks, after removing the queen cage, before it has built up enough comb on the frames to add another layer to the hive, and this can be determined without intensive frame inspection.

Note: Having an entrance feeder will allow you to check your feed without disturbing colony.

Overworking your hive will lead to a lack of developed frames, requires a constant feed supply and no honey harvest. This can also lead to a weak colony that will result in higher mite counts and more diseases. Not over working the hive will allow the bees to draw out comb, forage for nectar and pollen, and rebuild the colony properly.